 |
|||
|
Page Title:
Alternative quality conformance provisions. |
|
||
| ||||||||||
|
|  MIL-M-45945A
material submitted for inspection in accordance with this speci-
fication shall comply with the homogeneity criteria specified
herein, regardless of the type of inspection procedure which is
being applied to detemine conformance with requirements.
4.4.1.1 Machine guns. The number of machine guns in an
inspection lot shall be either 200 or one month's production,
whichever is smaller Machine guns shall be assembled from lots
of component parts that have met all inspection requirements
specified herein. Endurance test and interchangeability test lot
sizes shall be as specified in 4.4.3.5.1 and 4.4.3.4.1.1
respectively.
4.4.2 Examinations
and
test.
a. Classification of characteristics. Quality conformance
examinations and tests are specified in the following paragraphs.
The contractor's quality program or detailed inspection system
shall provide assurance of compliance of all characteristics with
the applicable drawing and specification requirements utilizing
as a minimum the conformance criteria specified.
b. Alternative quality conformance provisions. Unless
otherwise specified herein or provided for in the contract,
alternative quality conformance procedures, method or equipment,
such as statistical process control, tool control, other types of
sampling plans,etc., may be used by the contractor when they
provide, as a minimum,the level of quality assurance required by
the provisions hereiin. Prior to applying such alternative
procedures, methods or equipment, the contractor shall describe
them in a written proposal submitted to the Government for
evaluation (see 6.13) . When required, the contractor shall
demonstrate that the effectiveness of each proposed alternative
is equal to or better than the specified quality conformance
provisions(s) herein. In case of dispute as to whether the
contractor's proposed alternative(s) provides equivalent
assurance the provisions of this specification shall apply. All
approved alternative provisions shall be specifically
incorporated into the contractor's quality program or inspection
system, as applicable.
16
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals