 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-45974(WC)
Manually examine firing pin to determine
4.5.2.2.3.4 Firing pin.
compliance with 3.2.3.4.
4.5.2.2.3.5 Disassembly of bolt assembly.
a.
Disassemble all parts except ejector from bolt assembly.
b.
Visually examine all parts for mutilations, breaks or
cracks.
c.
Visually examine bolt lugs, operating cam cut, rollers,
guideways, cam actuator assembly, extractor lips and ejector
face for cracks, burrs, sharp edges or deformations.
d.
Visually examine firing pin striker point; it shall be
smooth and free of pits and burrs. Examine fillet radii
at spools for cracks and deformations.
e.
Reassemble bolt assembly, assuring that cam actuator
assembly is properly assembled with roller end forward
on bolt.
4.5.2.2.4 Buffer and back plate assemblies. Visually and manually
examine buffer and back plate assemblies to determine compliance with
3.2.4 and 3.2.5 respectively.
4.5.2.2.5 Cartridge feed tray assembly.
a.
Visually examine cartridge feed tray assembly to determine
compliance with 3.2.6.
b.
Visually examine feed plate guideways and cartridge stops
for burrs, sharp edges or deformations.
4.5.2.2.5.1 Cartridge retainer pawl.
Visually and manually examine retention, spring action, and
a.
free travel of cartridge retainer pawl to determine compliance
with 3.2.6.1.
b.
Visually examine the cartridge retaining pawl for cracks,
burrs, sharp edges or deformations.
4.5.2.2.5.2 Cartridge rollers. Visually and manually examine
cartridge rollers to determine compliance with 3.2.6.2. .
Manually examine charger to determine
4.5.2.2.6 Charger assembly.
compliance with 3.2.7.
4.5.2.2.6.1 Cable assembly.
a.
Manually examine retention and free movement of cable
assembly to determine compliance to 3.2.7.1.
b.
Visually and manually examine the swaging to determine
compliance with 3.2.7.1.
11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals