 |
|||
|
Page Title:
Quality conformance inspection. |
|
||
| ||||||||||
|
|  MIL-M-46862B (MI)
TABLE V.
Sampling plan for quality conformance inspection.
Lot Size
Sample Size
All
2 to 315
315
316 to 35,000
490
35,001 to 150,000
715
150,001 and over
NOTE:
The acceptance number in all cases is ZERO.
The rejection number in all cases is ONE.
4.3.2 Lot formation. A lot shall consist of all the material manufactured in one
continuous operation by the same process by the same manufacturer in accordance
with this specification and submitted at one time for acceptance inspection.
4.3.3 Quality conformance inspection. Quality conformance inspection of the
sample specified in 4.3.1, to determine compliance with characteristics specified in
Table VI, shall be conducted in accordance with the corresponding test and inspection
paragraphs.
TABLE VI. Quality conformance inspection.
Characteristics
Requirement
Test paragraph
paragraph
Composition
3.2.1
4.5.4.1
Mechanical properties
3.3.2
4.5.4.3
Resin content, % by weight
3.3.1
4.5.4.4
Volatile content, % by weight
3.3.1
4.5.4.5
Specific gravity
3.3.1
4.5.4.6
Gel time, minutes
3.3.1
4.5.4.7
Packaging, packing and marking
5.1
4.6
Workmanship
3.5
4.7
6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals