 |
|||
|
Page Title:
Responsibility for inspection and standard quality assurance provisions |
|
||
| ||||||||||
|
|  MIL-M-48629 (AR)
method used shall not be injurious to any parts, nor shall the
parts be contaminated by the cleaning agents. Exterior surface
coatings shall be continuous; however a few light scratches not
exposing base material may be permitted. All required markings
and stampings shall be neat and sharply defined. Required packing
shall be dry.
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection and standard quality
assurance provisions. Unless otherwise specified herein or in the
contract, the provisions of MIL-A-48078 shall apply and are hereby
made a part of this detail specification.
4.2 Classification of inspections. The following types of
inspection shall be conducted on this item.
First article inspection (see 4.3).
a.
Quality conformance inspection (see 4.4).
b.
4.3
First article inspection.
4.3.1 Submission. The contractor shall submit a first
article sample as designated by the contracting officer for
evaluation in accordance with provisions of 4.3.2. The first
article sample shall consist of the following items in the
quantities as indicated.
DRAWINGS
PART DESCRIPTION
QUANTITY
Mine, Antitank,
Practice: M79
9317994
15
4.3.2 Inspections to be performed.
See MIL-A-48078 and
Table I as specified herein.
4.3.3
Rejection.
See MIL-A-48078.
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals