 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-53077(ME)
(Copies of specifications, standards, handbooks, drawings, publications, and other Government
documents required by contractors in connection with specific acquisition functions should be obtained
from the contracting activity or as directed by the contracting officer.)
2.2 Other publications. The following document(s) form a part of this specification to the extent
specified herein. Unless otherwise specified, the issues of the documents which are DOD adopted shall be
those listed in the issue of the DoDISS specified in the solicitation. Unless otherwise specified, the issues
of documents not listed in the DoDISS shall be the issue of the non-Government documents which is
current on the date of the solicitation.
AMERICAN WELDING SOCIETY (AWS)
D1.1 - Structural Welding Code - Steel
D1.2 - Structural Welding Code - Aluminum
(Application for copies should be addressed to the American Society of Welding Society,
550 N.W. LeJeune Rd., PO Box 351040, Miami, FL 33135.)
AMERICAN SOCIETY FOR MECHANICAL ENGINEERS (ASME)
Boiler and Pressure Vessel Code, Section IX, Welding and Brazing Qualifications
(Application for copies should be addressed to the American Society of Mechanical Engineers,
345 East 47th Street, New York, NY 10017.)
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI/AS 478 - Identification Marking Methods
(Application for copies should be addressed to the American National Standards Institute,
1430 Broadway, New York, NY 10018.)
(Non-Government standards and other publications are normally available from the organizations
which prepare or which distribute the documents. These documents also may be available in or through
libraries or other informational services.)
2.3 Order of precedence. In the event of a conflict between the text of this specification and the
references cited herein, (except for associated detail specifications, specifications sheets or MS standards),
the text of this specification shall take precedence. Nothing in this specification, however, shall supersede
applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Description. The M1 roller mounting kit (M1RMK) provides the interface between the track
width, tank mounted mine clearing roller kit and the Ml series tank. The mounting kit consists of a one
piece weldment with integrated mounting brackets and a hydraulic quick disconnect system with
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals