4.4.2 Examination. Samples selected in accordance with 4.4.2 shall be examined in
accordance with 4.5.1 and tested in accordance with 220.127.116.11. Acceptable quality level (AOL)
shall be 1.0 percent defective for major defects and 2.5 percent for minor defects.
4.5 Inspection schedule.
4.5.1 Examination. Units for examination shall be examined in accordance with table I,
18.104.22.168 Examination conditions. Unless otherwise specified, conformance examination shall be
performed by the contractor at the contractor's location, and witnessed by the Government.
22.214.171.124 Examination procedures (first article). One or more first article kits, selected at
random, shall be examined for conformance to dimensions specified on the drawings.
TABLE I. Examination schedule.
Dimensions not as specified.
Parts and components not as specified.
Material not as specified.
Materials are not resistant to corrosion or
deterioration for the applicable storage and
105. Dissimilar metals as defined in
MIL-STD-889 are not effectively insulated
from each other.
106. Contractor does not have documentation
available for identification of materials,
material finishes, or treatments.