 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-63333(AR)
3.8 Operability. The requirements of 3.8.1 shall be met at the
temperatures specified in 3.3.2 and 3.3.3.
3.8.1 Controls.
3.8.1.1 Periscope locking lever. Lever Assembly 8589900, shown on
Drawing F11834835, shall be manually operable through the range required to
secure and permit removal of the periscope body assembly.
3.8.1.2 Shield actuating handle. Handle 10542148 shall be manually
operable through the range required to raise and liner the shield to the fully
open to the fully closed position.
3.8.1.3 Handle locking latch. When Latch 10542138 is released while the
shield is being raised, the handle shall lock the shield in the fully open
position. When the latch is released while the shield is being lowered, the
handle shall lock the shield in the fully closed position.
3.9 Circuitry. The circuitry of the mount shall have electrical
continuity between its respective terminations and show no continuity between
terminations and mount.
3.10 interchangeability.
3.10.1 Interchangeability - mechanical. The mount shall be capable of
accepting Head Assemblies 10542204 and 10558203 and Body Assemblies 11834841-2
and 11834841-1.
3.10.2 Interchangeability - pressure retention. With the head and body
assemblies mated to the mount, the mount shall withstand an internal pressure
of 5 + 0.10 pounds per square inch gage (psig) for a minimum of 2 hours
without loss of pressure in excess of 0.2 pounds (psig).
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in the
contract or purchase order, the supplier is responsible for the performance of
all inspection requirements as specified herein. Except as otherwise
specified, the supplier may utilize his own facilities or any other facilities
suitable for the performance of the inspection requirements specified herein,
unless disapproved by the Government. The Government reserves the right to
perform any of the inspections set forth in the specification where such
inspections are deemed necessary to assure supplies and services conform to
prescribed requirements.
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals