 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-63995 (AR)
6.2.2 Data requirements. When this specification is used in
an acquisition which incorporates a DD Form 1423, Contract Data
Requirement List (CDRL) , the data requirements identified below
shall be developed as specified by an approved Data Item
Description (DD Form 1664) and delivered in accordance with the
approved CDRL incorporated into the contract. When the provisions
of DAR 7-104.9(n) (2) are invoked and the DD Form 1423 is not
used, the data specified below shall be delivered by the
contractor in accordance with the contract or purchase order
requirements. Deliverable data required by this specification is
cited in the following paragraphs:
Date Requirements
Aplicable DID
Paragraph No,
4.6.1, 4.6.2, 4.6.3,
Quality Inspection
DI-R-1724
4.6.4
Testr Demonstration
and Evaluation Rpt.
6.3 Assembly areas. Assembly areas, special provisions, and
equipment should be provided by the contractor. The assembly
areas should be air conditioned using an air conditioning unit
with a 50 micron filter. The area temperature should be
0
0
maintained between 68 and 72 F. The air flow rate per cubic
inch per minute should be such as to maintain area air pressure at
between .75 and 1.5 inches of water. Relative humidity should not
exceed 40-50 percent. Areas should be clean and free of dust,
lint, and abrasive materials that may become entrapped in the
assembled mechanisms. No grinding, filling, scraping, or any
operation producing abrasive dust should be performed in the
assembly area.
6. 4 Functional firing. Information regarding the artillery
simulator, see 4.7.3, is available from the Commanding Officer,
Rock Island Arsenal, Rock Island, IL 61299-6000.
6.5 Supersession data. This specification includes the
requirements" of Rock Island Purchase Description RIAPD-680, dated
15 July 1967.
22
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals