 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-70542 (AR)
QUALITY ASSURANCE PROVISIONS
4.
4.1 Responsibility for inspection. Unless otherwise specified in
the contract or purchase order, the contractor is responsible for the
performance of all inspection requirements as specified herein.
Except as otherwise specified in the contract or purchase order, the
contractor may use his own or any other facilities suitable for the
performance of the inspection requirements specified herein, unless
disapproved by the Government. The Government reserves the right to
Perform any of the inspections set forth in the specification where
such inspections are deemed necessary to assure supplies and services
conform to prescribed requirements.
4.1.1 General provisions. The component and subassembly inspec-
tion requirements of MIL-F-13926 form a part of the quality assurance
provisions of this specification. Definitions of inspection terms
shall be as listed in MIL-STD-109.
4.2 Classification of inspections. The inspection requirements
specified herein are classified as follows:
1. First article inspection (see 4.4).
2. Quality conformance inspection (see 4.5).
4.3 Inspection conditions. Unless otherwise specified, all
inspections shall be performed in accordance with the quality
assurance provisions of MIL-F-13926 and the conditions of 3.2.1.
4.4 First article. The requirement for first article approval
and the designation of responsibility for first article inspection to
either the Government or the contractor shall be specified in the
contract.
4.4.1 Sample. The first article sample shall be three assemblies
selected at random by the Government representative from the first 15
production assemblies.
4.4.2 Inspection. The sample shall be subjected to all the
inspections specified in Table 1.
4.4.3 Failure. Failure of any assembly to meet any requirement
shall be cause for refusal to grant first article approval. The
Government reserves the right to terminate first article inspection
upon any failure of any assembly to comply with any stated
requirement.
4.4.4 Responsibility. The contractor, whether or not respon-
sible, shall inspect the sample for conformance to all contractual
The Government
reserves the right to witness inspections performed by the contractor.
-5-
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals