 |
|||
|
Page Title:
Components; assemblies and materiels examinations. |
|
||
| ||||||||||
|
|  MIL-M-81392(AS)
TABLE I (continued)
NOTES:
Denotes tests applicable to plan.
2
Ac = Acceptance number
3 Re = Rejection number
Samples used from the vent release force test shall not be returned
to the lot.
4 For requirement (a) on the Mk 25 Mod 2 Marker, use an AQL of 1.5
percent defective and on the Mk 25 Mod 3 Marker, use an AQL of
2.5 percent defective.
4.1.3 Test equipment and gages. All test equipment and gages shall be
supplied and maintained by the contractor as specified in Specification
MIL-I-45607. The contractor shall maintain a calibration system as specified
in Specification MIL-C-45662.
4.1.5.1 Test conditions. The maximum allowable tolerances on test
conditions specified herein shall be as follows:
1.
Plus or minus
Temperature:
2. Relative humidity:
Plus 5 percent, minus 0 percent.
3. Vibration amplitude
Plus or minus 10 percent.
4. Vibration frequency: Plus or minus 2 percent.
4.2 Examinations. Random samples shall be selected and examined as
specified in 4.1.1 or 4.1.2 as applicable.
4.2.1 Components; assemblies and materiels examinations. Prior to
assembly all components, assemblies and materials used in the marker shall
meet the requirements of 3.2.1.
4.2.1.1 Squib examinations. In the absence of previous inspection of
the Squib, Electric, Mk 13 Mod 0, inspection shall be performed as specified
in Specifications 4630.
4.2.1.2 Battery examinations. In the absence of previous inspection of
the Battery, Water Activated, Mk 72 Mod 1, inspection shall be performed as
specified in Specification OS 8765.
4.2.1.3 Starter composition examinations. In the absence of previous
inspection of the starter composition inspection shall be performed as
specified In Specification WS 4626.
4.2.2 Marker examinations. Examinations shall be made to ascertain
that markers meet the requirements of 3.2.2. If the number of defective
markers equals or exceeds the rejection number for any category the lot
represented shall be rejected. Only markers containing none of the defects
listed in Table II shall be used for further testing or returned to the lot.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals