 |
|||
|
Page Title:
Scheduled (preventive) maintenance. |
|
||
| ||||||||||
|
|  MIL-M-82376B
(3) System maintenance. (N) This matrix shall contain all tasks,
objectives related to maintenance of any system components not
covered under the operation and computer and peripheral
maintenance matrices listed above.
Major elements. (N) The major elements of the Maintenance
b.
Qualification Matrix are defined as follows:
The tasks are those identified on the Tasks Performed by
(1)
Maintainers sheets. The tasks shall be presented in the same
sequence and numbered as listed on the Tasks Performed by
Maintainers sheets. All elements and job steps related to the
first major task shall be recorded before proceeding to the
second major task.
Section I through Section VII refers to those sections of the
(2)
Operation and Maintenance manual which provide information on
performance of the major task, element, or job step, as
appropriate. The columns, i.e. section I through VII and the
COTS manuals, shall include all paragraph(s), page(s),
figure(s), diagram(s), and list(s) related to the specific
task required for the maintainer to achieve the required
qualification.
A written explanation of the matrices shall be provided to
(3)
ensure that each major task, elements and job steps are
referenced in the matrix, can be cross referenced to all
sections of the technical documentation, and are sequenced in
the order performed.
3.3.1.6.2 Maintenance levels. This section shall describe in detail the
maintenance responsibilities allocated to organizational, intermediate, and
depot maintenance levels in accordance with the maintenance concept.
3.3.1.6.3 Depot maintenance. (F) Depot maintenance requirements shall be
provided to the Air Force as separate manuals in accordance with MIL-M-38789.
This section shall contain
3.3.1.6.4 Scheduled (p reventive) maintenance.
scheduled preventive maintenance procedures to be accomplished on TUE, COTS,
and operational equipment in the training device. For procurements in which
maintenance requirement cards (MRC) or work cards (WC) are included as a
contract item, a paragraph shall be provided to explain that the MRC or WC
contain the planned scheduled maintenance procedures for the particular
training device. Reference to the MRC or WC shall be by Government
publication number. For procurements in which MRC or WC are not a contract
item, the detailed requirements for scheduled preventive maintenance text
shall be provided as specified in 3.3.1.6.4.3 through 3.3.1.6.4.7.
3.3.1.6.4.1 Introduction. The introduction shall explain the purpose,
scope, and arrangement of the scheduled preventive maintenance data. When a
19
0023E
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals