REQUIREMENTS FOR ARMY TRAINING DEVICES
10.1 Scope. This appendix contains the detailed requirements for the
preparation of technical manuals for Army training devices. The general
requirements of the main body of this document and MIL-M-38784 also apply.
This appendix is a mandatory part of the document. The information contained
herein is intended for compliance.
The types of technical manuals to be prepared in
accordance with this appendix are:
Type -10 - Operator's Manual
Type -20 - Organizational Maintenance Manual
Type -12 - Operator and Organizational Maintenance Manual
Type -14 - Operator, Unit, Direct Support, and General Support
Type -24 - Unit, Direct Support, and General Support Maintenance Manual
Type -34 - Direct Support and General Support Maintenance Manual
(This section is not applicable to this
20. APPLICABLE DOCUMENTS.
30.1 General. The inclusion of Repair Parts and Special Tools Lists
(RPSTL) in a combined manual such as a Type -34 shall be indicated by adding,
"Including Repair Parts and Special Tools List" to the title and adding "&P"
to the number, i.e.; -34&P. These lists shall be prepared in accordance with
MIL-STD-335 (TM) and shall be included as an appendix in each manual as
indicated. For large or complex devices, the RPSTL may be a separate manual
with the number followed by "P," i.e.; -34P.
30.2 Type -10 - Operator's manual. The operator's manual shall describe
in detail the operation of the item. It shall also describe the maintenance
allocated to the operator/crew by the maintenance allocation chart (MAC). The
arrangement of the manual shall be as follows: