|
| MIL-M-82376B
APPENDIX A
b.
Reporting equipment improvement recommendation (EIR's) (see
30.2.2.lb)
The destruction paragraph shall be in
Destruction instructions.
accordance with MIL-M-63042.
30.3.2.2 Section II - Description and data. Section II shall consist of a
description paragraph and a tabulated data paragraph. The description
paragraph shall reference the operator's manual for general description. The
tabulated data paragraph shall contain the tabulated data pertinent to unit
maintenance but which is not contained in the operator's manual.
30.3.3 Chapter 2 - Unit maintenance instructions.
Section I shall
30.3.3.1 Section I - Service upon receipt of materiel.
consist of the following paragraphs.
a.
Inspection, service, installation, and setup instructions.
Instructions for inspecting and servicing the equipment, including
reference to pertinent organizational daily preventive maintenance
checks and services, shall be provided in tabular form. Equipment
requiring calibration shall be indicated and reference made to a
publication containing the applicable calibration procedure.
Procedures for setting up the equipment shall be included and, if
necessary for clarity, illustrated.
b.
Equipment adaptation, The equipment adaptation paragraph shall
contain procedures for adapting the equipment for the various
operations for which it is designed and for which organization
maintenance has the responsibility.
30.3.3.2 Section II - Parts. special tools. and equipment. Section II
shall make reference to the Repair Parts and Special Tools List (RPSTL)
pertaining to unit maintenance. The use of special tools and equipment shall
be described and, if necessary for clarity, illustrated.
30.3.3.3 Section III - Lubrication instructions. Section III shall
contain references to pertinent lubrication orders. When there are no
separately published lubrication orders or when there are lubrication
instructions in addition to those contained in such orders, the instructions
shall be provided in this section.
30.3.3.4 Section IV - Preventive Maintenance Checks and Services (PMCS).
PMCS shall be prepared in accordance with MIL-M-63036.
30.3.3.5 Section V - Troubleshooting. The troubleshooting section of the
manual shall consist of text, diagrams, and tables as required to support
fault isolation to the lowest replaceable assembly, subassembly, or piece part
0023E3
83
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |