 |
|||
|
Page Title:
Capacitor-Resistor network characteristics |
|
||
| ||||||||||
|
|  MIL-N-63400(AR)
3.3.1 Solderability. Terminal leads shall be free of foreign
material, flash marks, and other irregularities and conform to the
requirements of DUG 9292137/9292138. Leads shall also be
conditioned for machine insertion,
3.3.2 Enclosure. The network shall be coated and encapsulated
to withstand the environmental tests as specified in detailed
drawings and this specification.
3.3.3 Physical Dimensions. The physical dimensions of the
resistor network package shall comply with all requirements in
detailed drawing. Inspection of the physical dimensions shall be in
accordance with MIL-STD-883, Method 2016.
3.4 Electrical characteristics.
3.4.1 Capacitor-Resistor network characteristics. When
capacitor-resistor networks are subjected to the test or condition
specified in Table I the percent change in resistance or in
capacitance in each element shall not exceed the value specified in
Table I. The condition or test requirement method shall be in
accordance with MIL-N-87144 for characteristic M resistor networks
unless otherwise specified herein. The condition or test
requirement method for capacitors shall be in accordance with those
specified in this specification or when applicable in accordance
with MIL-N-87144.
3.4.1.1 Resistance. Resistance and tolerance values are
specified on DWG 9292137/9292138.
3.4.1.2 Capacitance. Capacitance and tolerance values are
specified on DWG 9292137/9292138.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals