 |
|||
|
|
|||
| ||||||||||
|
|  MIL-N-871857(AS)
N a m e p l a t e - The nameplate shun designate
3.5.3.7.1
c o n t r o l C-3928(P)/ARN-52(V) instead of C-2010/ARN-52(V).
P a n e l Lights - The panel lights for the C-3928(P)/
3.5.3.7.2
ARN-52(V) shall utilize type MS25237-328 lamps and MS25010A11A
These lamps are rated at 6 volts and the lampholders
lampholders.
have a red lens.
3.5.3.8
Control
C-7893(P)/ARN-52(V) - The control unit
C-7893(P)/ARN-52(V) will be identical to the C-2010/ARN-52(V)
control unit (para. 3 . 5 . 2 ) except as follows:
Nameplate - The nameplate shall designate
3.5.38.1
control
C-7893(P)/ARN-52(V)
instead
of
C-2010/ARN-54(V).
P a n e l Lights - The panel lights for the C-7893(P)/
3.5.3.8.2
ARN-52(V) shall utilize type MS25237-328 lamps and MS25010A12A
These lamps are rated 6 volts and the lampholders have
lampholders.
a clear lens.
Control
C-7712/ARN-52(V) - The control unit
3.5.3.9
C - 7 7 1 2 / A R N - 5 2 ( V ) will be identical to the C-2010/ARN-52(V)
control unit (para. 3 . 5 . 2 ) except as follows:
N a m e p l a t e - The nameplate shall designate
3.5.3.9.1
control
C-7712/ARN-52(V)
instead
of
C-2010/ARN-52(V).
P a n e l Lights - The panel lights for the C-7712/
3.5.3.9.2
ARN-52(V) shall utilize type MS90452-7153 white lamps embedded in
the panel. These lamps are rated 5 volts.
3.5.4
Mounting
MT-2091/ARN-65(V) - A vibration and
s h o c k a b s o r b i n g mounting MT-2091/ARN-65(V) shall be provided
f o r the RT-1030/ARN-105 receiver-transmitter with a form factor
as shown on Figure 5. Its loaded height shall not exceed 2.25 inches.
F u n c t i o n - The mounting shall provide for vibra-
3.5.4.1
t i o n shock absorption in accordance with MIL-C-172.
- T h e weight of the MT-2091/ARN-65(V)
3.5.4.2
Weight
mounting shall not exceed 2.25 pounds.
C o n t e n t s - The mounting shall contain the following:
3.5.4.3
Shock Isolators (5)
Ground Straps (2)
Guide Pins (2)
34
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals