Click here to make tpub.com your Home Page

Page Title: PBI Illustration Intensity
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-N-85005A(AS)
READ - This momentary action PBI shall be normally
3.5.5.5.12
illuminated green.  When depressed it shall generate the READ IN function
code in the Command Word.  When released it shall generate the READ OUT
function code.
CLEAR - This momentary action PBI shall be normally
3.5.5.5.13
illuminated green.  When depressed, it shall generate the CLEAR function
code in the Command Word and reset the selected Gram/Trace indicator(s).
MAN (Manual) - This momentary action PBI shall be
3.5.5.5.14
normally illuminated green.  When depressed, it shall generate the Auto
Update Function Code in the Command Word, and reset the selected Gram/Trace
indicator(s).
AUTO - This momentary action PBI shall be normally
3.5.5.5.15
illuminated green.  When actuated, it shall generate the Auto Update
Function Code in the Command Word, and reset the selected Gram/Trace
indicator(s).
PBI Illumination Intensity - All PBI illumination
3.5.5.5.16
shall be of variable intensity under control of the external control for
edge-lit panel lighting.
Readouts - The Converter shall contain the following
3.5.5.6
readouts that shall be controlled by data received from the NC derived
from LED/MSD words through the SDC interface.
GRAM/TRACE - Each of the 12 readouts shall contain:
3.5.5.6.1
A two digit, 7-segment LED readout for the RF number.
A three digit, 7-segment LED readout for DEG or KYDS display.
The eight Gram readouts (channels I, II, III, and IV of each sensor
station) shall contain an indicating lamp for TRK display. This indicator
shall be located between the RF and DEG/KYDS LEDS.
The readouts for the DEG/KYDS of the Upper and Lower Traces (U and
L) of each sensor station shall contain decimals between the units and
tens digits and between the tens and hundreds digits.
The RF and DEG/KYDS readouts shall have two levels of illumination,
high and low, controlled by the computer with low being normal illumination.
The RF and DEG/KYDS value, track lamp, illumination, and decimal
control shall be obtained from the GRAM/TRACE word as shown in Paragraph
3.5.5.4.4.2, and Figure 26.
- 84 -

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business