|
| MIL-N-85005A(AS)
Analog to Digital (A/D) Conversion Accuracy - The
3.5.8.4.1.2
A/D conversion shall be made to 12 bits of resolution. the conversion
accuracy over the temperature range -55C to +55C shall be:
(1) Within 12 arc minutes statically and dynam-
ically up to, but not greater than, an angle
rate of change of 15 degrees per second for all
synchro and resolver inputs, except conversion
accuracy for asterisk (*) inputs can be 18
arc minutes.
(2) Within 10% of full scale value for roll
gimbal temperature.
Analog Outputs - The SDC shall provide the following
3.5.8.4.2
analog outputs:
MAXIMUM LOAD
TYPE
OUTPUT
AF/A24J-1 HSI
3 wire synchro, 11.8 V
Course Command
(2 units)
line to line, 400 Hz,
Phase A
AF/A24J-1 HSI
3 wire synchro, 11.8 V
100's Distance
(2 units)
line to line, 400 Hz
Phase A
AF/A24J-1 HSI
3 wire synchro, 11.8 V
10's Distance
(2 units)
line to line, 400 Hz
Phase A
AF/A24J-1 HSI
3 wire synchro, 11.8 V
1's Distance
(2 units)
line to line, 400 Hz
Phase A
AF/A24J-1 HSI
3 wire synchro, 11.8 V
Drift Angle
(2 units)
line to line, 400 Hz
Phase A
ID-499/ASA-13
3 wire synchro, 11.8 V
N-S Distance
Position Indicator
line to line, 400 Hz
and PT-396/AS Plotting
Phase A
Board
ID-499/ASA-13 Position
3 wire synchro, 11.8 V
E-W Distance
Indicator and PT-396/AS
line to line, 400 Hz,
Plotting Board
Phase A
- 101 -
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |