 |
|||
|
Page Title:
Control-Indicator, C-10421/ASN-124 |
|
||
| ||||||||||
|
|  MIL-N-85005A(AS)
Appendix
30.5.2.8
Electrical Connections - Electrical Connections to external
circuits shall be as follows:
Reference
Designation
Receptacle Type
Function
SJTP02RE14-35PB(023)
Power and discretes
J1
J2
SJTP02RE14-18P(023)
Power
30.5.2.9
Mounting - The Controller shall be a console mounted unit in
accordance with MIL-C-6781 Type 1.
Color - The controller shall be painted lusterless gray,
30.5.2.10
No. 36231, in accordance with FED-STD-595.
30.5.3
Control-Indicator, C-10421/ASN-124 - The Control-Indicator
shall meet the following requirements.
Function - The Control-Indicator shall provide selection of
30.5.3.1
radio navigation aids or the Navigation-Display Set as the source of
data for the HSI. It shall provide an annunciator to indicate when True
Heading data is being displayed, and an annunciator to indicate INS
Warning. The front panel shall conform to Figure 43.
Form Factor - The Control-Indicator, excluding front panel
30.5.3.2
protrusions, but including the rear connector, shall be formed within
the following maximum dimensions (inches).
Width
Height
Depth
3.265
3.265
2.200 (behind mounting
surface)
Weight - The weight of the Control-Indicator shall not exceed
30.5.3.3
2 pounds.
30.5.3.4
Controls - The Control-Indicator shall provide a two-pole
double throw toggle switch for selecting CMPTR or RADIO. The switch
contacts shall provide continuity between a separate pair of lines in
each position.
30.5.3.5
Displays
30.5.3.5.1
True Heading - The Control-Indicator shall provide an
indicator lamp to signal when True Heading data is being displayed on
the HSI. The lamp shall be illuminated green when the True Heading Lamp
power is supplied to the Control-Indicator. The lamp shall provide
integral push-to-test function and adjustable brightness control.
- 146 -
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals