|
| INCH-POUND
MIL-O-52374D
November 7, 2006
SUPERSEDING
MIL-O-52374C
11 April 1975
MILITARY SPECIFICATION
INACTIVE FOR NEW DESIGN
after 5 October 1990
OSCILLATOR: HIGH VOLTAGE
GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the general requirements for a transistorized, high-voltage,
oscillator.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of
this list, document users are cautioned that they must meet all specified requirements documents cited in
sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
-
Electron Tube, Image Converter, Type 6914.
-
Battery, Dry, BA-1100/U.
-
Transformers and Inductors (Audio, Power, and High-Power
Pulse), General Specification for.
-
Semiconductor Devices, General Specification for.
-
Sealing Compound (with Accelerator), Silicone Rubber,
Electrical.
Comments, suggestions, or questions on this document should be addressed to: Defense Supply Center,
Columbus, ATTN: DSCC-VAT, Post Office Box 3990, Columbus, Ohio 43218-3990 or by email to
CircuitProtect@dla.mil. Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at http://assist.daps.dla.mil.
AMSC N/A
FSC 5855
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |