 |
|||
|
|
|||
| ||||||||||
|
|  MIL-O-81151A(OS)
characteristics of this specification after being tested as in 4.5. 1.2.
3.5.1.2 Vibration, operating. The oscillator subassembly shall show
no damage and shall meet all the performance requirements and product
characteristics of this specification during and after the test specified
in 4.5.1.3.
3.5.1.3 Vibration, transportation. The oscillator subassembly shall
show no damage and shall meet all the performance requirements and pro-
duct characteristics of this specification after being tested as in
4.5.1.4.
3.5.2 Shock, transportation. The oscillator subassembly shall show
no damage and shall meet all the performance requirements and product
characteristics of this specification after being tested as in 4.5.2.
.
3.5.3 Temperature and humidity
3.5.3.1 High temperature and humidity, nonoperating. The oscillator
subassembly shall show no damage and shall meet all the performance re-
quirements and product characteristics of this specification after being
tested as in 4.5.3.1.
3.5.3.2 High temperature, operating. The oscillator subassembly shall
be capable of meeting all the performance requirements of this specifica-
tion while undergoing the test specified in 4.5.3.2.
3.5.3.3 Low temperature, nonoperating. The oscillator subassembly
shall meet all the performance requirements and product characteristics of
this specification after being tested as in 4.5.3.3.
3.5.3.4 Low temperature, operating. The oscillator subassembly shall
be capable of meeting all the performance requirements of this specifica-
ion while undergoing the test specified in 4.5.3.4.
3.5.4 Immersion. The oscillator shall show no evidence of leakage
during the immersion test, specified in 4.5.4, and thereafter shall meet
the performance and product requirements of this specification,
3.6 Cleanup Prior to and after final assembly all parts, components
and the assembly shall be thoroughly cleaned of loose, spattered, or ex-
cess solder, metal chips and other foreign matter. Burrs and sharp edges
as well as excessive rosin flash shall be removed.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals