 |
|||
|
Page Title:
Table I. Pallet Assembly Construction Requirements, Style 1, 1A and lB. |
|
||
| ||||||||||
|
|  MIl-P-15011J
TABLE I.
Pallet Assembly Construction Requirements, Style 1, 1A and lB.
1.
Assemble pallet in accordance with Figures 1, 1A or 1B
as applicable.
For group III, IV and laminated woods fasten each top deckboard
2.
to stringer boards with 1 5/8 inch (41 mm) 11 gauge drive screw
nail. For group I and II woods, 1 inch (38 mm) 11 gauge drive-
For top deck boards 3 5/8 inch (92 mm)
screw nails shall be used.
3 1/2 inch (89 mm) for wood groups I and II] to 4 7/8 inches (124 mm),
5 to 6 7/8 inches (127 mm to 175 mm), and 7 to 8 inches (178 mm to
216 mm) wide; 2, 3, and 4 nails, respectively shall be used at each
joint.
Fasten top deckboard and stringer boards assembly to post with
3.
3 1/4 inch (83 mm) 10 guage drive-screw nails. Use 3 nails for
3 5/8 inch (92 mm) and 5 5/8 inch (143 mm) posts; and 4 nails for
7 5/8 inch (194 mm) posts.
4.
Fasten each bottom deckboard to posts with 2 1/4 inch (57 mm) 11
gauge drive-screw nails. Use 3 nails for 3 5/8 inch (92 mm) and
5 5/8 inch (143 mm) posts; and 4 nails for 7 5/8 inch (194 mm)
posts.
TABLE II.
Pallet Assembly Construction Requirements, Style 2
Assemble pallet in accordance with Figure 2.
1.
2.
Fasten each top deckboard to stringer boards with one inch (25 mm)
staples or with one inch (25 mm) cement coated nails clinched.
Use 4 staples or 3 nails for 3 1/2 through 4 5/8 inch (89 mm through
118 mm) wide deckboards and 6 staples or 4 nails for larger boards,
Fasten top deck board and stringer board assembly to posts
3.
with three 2 1/2 inch (63 mm) 10 gauge drive-screw nails
per posts.
4.
Fasten bottom deckboards to posts with three 2 inch (51 mm)
11 gauge drive-screw nails per posts.
6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals