 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-17840C(SH)
MILITARY
MIL-STD-167-1 - Mechanical Vibrations of Shipboard Equipment
(Type I - Environmental and Type 11 - Internally
Excited).
MIL-STD-278 - Fabrication Welding and Inspection; and Casting
Inspection and Repair for Machinery, Piping and
Pressure Vessels in Ships of the United States
Navy.
MIL-STD-740 - Airborne and Structureborne Noise Measurements
and Acceptance Criteria of Shipboard Equipment.
MIL-STD-777 - Schedule of Piping, Valves, Fittings, and Associ
ated Piping Components for Naval Surface Ships.
MIL-STD-1399, - Interface Standard for Shipboard Systems Ship
Motion and Attitude.
Section 301
DOD-STD-2147 - Technical Repair Standards (TRS); Hull, Mechanical
and Electrical (HM&E) Preparation of. (Metric)
Boss, Gasket Seal Straight Thread Tube Fitting,
MS16142
Standard Dimensions for.
Plug for "O" Ring Gasket.
MS18229
2.1.2 Government drawings. The following Government drawings form a part
of this specification to the extent specified herein. Unless otherwise speci
fied , the issues shall be those in effect on the date of the solicitation.
DRAWINGS
NAVAL SEA SYSTEMS COMMAND (NAVSEA)
- Packings and Gaskets, Standard Application of.
B-153
- Root Connections for Attaching Piping.
B-214
810-1385850 - Piping, Installation, Pressure for All Services.
2.2 Other publications. The following documents form a part of this
specification to the extent specified herein. Unless otherwise specified, the
issues of the documents which are DoD adopted shall be those listed in the
issue of the DoDISS specified in the solicitation. Unless otherwise specified,
the issues of documents not listed in the DoDISS shall be the issue of the non-
government documents which is current on the date of the solicitation.
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
A 494 - Standard Specification for Castings, Nickel and Nickel
Alloy l
A 744 - Standard Specification for Castings, Iron-Chromium-
Nickel, Nickel-Base, Corrosion Resistant, for Severe
Service. (DoD adopted)
B 61- Standard Specification for Steam or Valve Bronze Castings.
(DoD adopted)
B 164 - Standard Specification for Nickel-Copper Alloy Rod,
Bar, and Wire. (DoD adopted)
B 369 - Standard Specification for Copper-Nickel Alloy Castings.
(DoD adopted)
B 446 - Standard Specification for Nickel-Chromium-Molybdenum-
Columbium Alloy (UNS N06625) Rod and Bar.
B 584 - Standard Specification for Copper Alloy Sand Castings
for General Applications. (DoD adopted)
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals