 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-17945A(SH)
MIL-M-17413 - Motors, Direct Current, Integral H.P. , Naval Shipboard.
MIL-M-17556 - Motor, Direct-Current, Fractional Hp. (Shipboard Use).
MIL-F-20042 - Flanges, Pipe, Bronze (Silver Brazing).
STANDARDS
MILITARY
MXL-STD-129 - Marking For Shipment and Storage.
MIL-STD-167-1 - Mechanical Vibrations of shipboard Equipment (Type I -
Environmental and Type II - Internally Excited) .
MIL-STD-278 - Fabrication, Welding and InspectIon; and Casting Inspection
and Repair for Machinery, Piping and Pressure Vessels in
Ships of the United States Navy.
MIL-STD-438 - Schedule of Piping, Valves, Fittings and Associated
Piping Components for Submarine Service.
>
MIL-STD-777 - Schedule of Piping, Valves, Fittings and Associated Piping
Components for Surface Ships.
DRAWING
NAVSEA
810-L385850 - Piping Instruments, Pressure for All Service.
PUBLICATIONS
NAVSEA 0900-LP-001-7000 - Piping Systems Brazed, Fabrication and Inspection.
NRL Report 7396 - Shipboard Shock and Navy Devices For Its Simulation.
(Copies of specifications, standards, drawings, and publications required by contractors
in connection with specific procurement functions should be obtained from the procuring
activity or as directed by the contracting officer.)
2.2 Other publications, The following document forms a part of this specification
to the extent specified herein. Unless otherwise indicated, the issue in effect on date of
invitation for bids or request for proposal shall apply.
NATIONAL BUREAU OF STANDARDS (NBS)
Handbook H28 - Screw-Thread Standards for Federal Services
(Application for copies should be addressed to Superintendent of Documents, U.S.
Government Printing Office Washington D.C. 20402) .
(Technical society and technical association specifications and standards are generally
available for reference from libraries. They are also distributed among technical groups and
using Federal agencies.)
3.
REQUIREMENTS
3.1 Materia1s. Materials shall conform to table I. Proposed alternative materials
shall give equal or better service than the materials specified. Proposed alternative
matarials shall be subject to review by the design review activity. Components of the pump
for which specific materials are not specified shall be materials compatible for the service
intended, Materials which can be sensitized and are subjected to heat treatment in the
sensitization range during fabrication shall be capable of passing the intergranular corrosion
tests of the base material specification. Materials shall not be sensitized during hard
facing,stress relieving, or repair welding.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals