|
| MIL-P-18472G(SH)
24 APRIL 1989
SUPERSEDING
MIL-P-18472F(SHIPS)
15 December 1972
(See 6.9)
MILITARY SPECIFICATION
PUMPS, CENTRIFUGAL, CONDENSATE, FEED BOOSTER, WASTE HEAT BOILER,
AND DISTILLING PLANT
This specification is approved for use by the Naval Sea Systems Command,
Department of the Navy, and is available for use by all Departments and
Agencies of the Department of Defense.
1.
SCOPE
1.1 Scope. This specification covers centrifugal pumps for condensate,
boiler feed booster, waste heat boiler, and distilling plant services on board
Naval ships. Distilling plant pumps covered herein are distillate, brine
overboard and drain service.
1.2 Classification.
The pumps shall be of the following classes as speci-
fied (see 6.2).
Class D-1 - Auxiliary condensate and distilling plant pumps - more than
18-inch submergence,
Class D-2 - Main and auxiliary condensate pumps - 18-inch or less
submergence.
Class E
- Main and auxiliary feed booster pumps.
2.
APPLICABLE DOCUMENTS
2.1 Government documen ts.
2.1.1 Specifications and standards. The following specifications and
standards form a part of this document to the extent specified herein. Unless
otherwise specified, the issues of these documents are those listed in the issue
of the Department of Defense Index of Specifications and Standards (DoDISS) and
supplement thereto, cited in the solicitation (see 6.2).
Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Commander, Naval Sea Systems Command, SEA 5523, Department of the Navy,
Washington, DC 20362-5101 by using the self-addressed Standardization Document
Improvement Proposal (DD Form 1426) appearing at the end of this document or by
letter.
FSC 4320
AMSC N/A
DISTRIBUTION STATEMENT A.
Approved for public release; distribution is unlimited.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |