 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-18472G(SH)
PUBLICATIONS
NAVAL SEA SYSTEMS COMMAND (NAVSEA)
NAVSEA 0900-LP-001-7000 - Fabrication and Inspection of Brazed
Piping Systems.
(Application for copies should be addressed to the Naval Publications and
Forms Center (ATTN: NPODS), 5801 Tabor Avenue, Philadelphia, PA 19120-5099.)
2.2 Non-Government publications.
The following documents form a part of
this document to the extent specified herein. Unless otherwise specified, the
issues of the documents which are DoD adopted are those listed in the issue of
the DoDISS cited in the solicitation. Unless otherwise specified, the issues of
documents not listed in the DoDISS are the issues of the documents cited in the
solicitation (see 6.2).
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
A 27 - Standard Specification for Steel Castings, Carbon, for
General Application.
(DoD adopted)
A 36 - Standard Specification for Structural Steel. (DoD adopted)
A 276 - Standard Specification for Stainless and Heat-Resisting
Steel Bars and Shapes.
(DoD adopted)
A 285 - Standard Specification for Pressure Vessel Plates, Carbon
Steel, Low- and Intermediate-Tensile Strength.
(DoD adopted)
A 487 - Standard Specification for Steel Castings Suitable for
Pressure Service.
A 515 - Standard Specification for Pressure Vessel Plates, Carbon
Steel, for Intermediate and Higher-Temperature Service,
(DoD adopted)
A 569 - Standard Specification for Steel, Carbon (0.15 Maximum,
Percent), Hot-Rolled Sheet and Scrip Commercial Quality.
(DoD adopted) -
A 743 - Standard Specification for Castings, Iron-Chromium, Iron-
Chromium-Nickel, Nickel-Base, Corrosion Resistant, for
General Application.
(DoD adopted)
A 744 - Standard Specification for Castings, Iron-Chromium-Nickel,
Nickel-Base, Corrosion Resistant, For Severe Service.
(DoD adopted)
B 61 - Standard Specification for Steam or Valve Bronze Castings.
(DoD adopted)
B 164 - Standard Specification for Nickel-Copper Alloy Rod, Bar,
and Wire. (DoD adopted)
B 369 - Standard Specification for Copper-Nickel Alloy Castings.
(DoD adopted)
B 584 - Standard Specification for Copper Alloy Sand Castings for
General Applications.
(DoD adopted)
(Application for copies should be addressed to the American Society for
Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals