Quality Assurance Provisions

Page Title: Quality Assurance Provisions
Back | Up | Next

Web
www.tpub.com

Information Categories

....

MIL-P-22497C(OS)

3.4.2 Humidity The power supply shall meet all the performance re-

quirements and product characteristics of this, specification while oper-

ating at relative humidities ranging up to 95 percent at temperatures up

to 130 degrees F.

3.4.3 Rough handling. The power supply, packaged and packed as speci-

fied in 5.1.1 and 5.2.1, shall meet all performance requirements and pro-

duct characteristics of this specification after being subjected to the

rough handling tests of 4.7.3.

3.5 Cleanup. Prior to and after final assembly, all parts, components

and the assembly shall be thoroughly cleaned of loose, spattered or ex-

cess solder, metal chips, and other foreign matter. Burrs and sharp edges

as well as rosin flash, shall be removed.

3.6 Workmanship. The power supply, including all parts and accessor-

ies, shall be constructed and finished in a manner to ensure compliance

with all requirements of this specification. Particular attention shall

be paid to neatness and thoroughness of soldering, wiring, marking of

parts and assemblies, impregnation of coils , plating, painting, machine-

screw assemblage, welding, riveting, brazing, and freedom of parts from

all burrs and sharp edges.

The standards of workmanship exhibited in any approved preproduction

sample, subject to any qualification stated in the Government's notice

of approval, shall be determinative of' the requirements of the contract

relative to workmanship insofar as not specifically covered by appli-

cable specifications.

4. QUALITY ASSURANCE PROVISIONS

4.1 Responsibility for inspection. Unless otherwise specified in the

contract or purchase order, the supplier is responsible for the performance

of all inspection requirements as specified herein. Except as otherwise

specified in the contract or order, the supplier may use his own or any

other facilities suitable for the performance of the inspection requirements

specified herein, unless disapproved by the Government. The Government re-

serves the right to perform any of the inspections set forth in the speci-

fication where such inspections are deemed necessary to assure supplies

and services conform to prescribed requirements.

Inspection of Power Supply Type

4.2 Classification of inspections.

IV(A) shall be classified as follows:

(a) Quality conformance inspection (paragraph 4.6)

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business