 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-45117E
4.3.4.1 (Cont)
Failure of the phosphate coating on the standard panels to comply with
the applicable requirements shall be cause for rejection of all projectiles
phosphate since the preceding test.
If two or more units of the sample fail to comply with the requirement
for paint adhesion, the lot shall be rejected. If one unit of the sample
fails to comply with the requirement, a second sample consisting of the
same number of units as specified for the first sample shall be tested.
If in the accumulated samples two or more units fail to comply with the
requirement for paint adhesion, the lot shall be rejected.
If two or more units of the sample fail to comply with the corrosion
resistance requirement, the lot shall be rejected. If one unit fails to
comply with the requirement, a second sample consisting of the same number
of units as specified for the first sample shall be tested. If in the
accumulated samples, two or more units fail to comply with the corrosion
resistance requirement, the lot shall be rejected.
The occurrence of one or more of the following casualties, as witnessed
by hole(s) in the fragmentation screen(s), or recovery of the part(s) or
fragment(s) shall be cause for rejection of the lot, except as otherwise
provided:
Body breakup.
a.
b.
Loss of nose.
c. Complete rotating band separation. This is defined as detachment
of all of the band having band seat knurling imprint.
d. Partial rotating band separation. This is defined as detachment of
part of the band having band seat knurling imprint.
e. The following acceptance criteria shall apply to thrown band fragments
having no evidence of band seat knurling imprint:
(1) The lot will reaccepted if two or less assemblies throw band
fragments having length not greater than 0.500 inch.
(2) The lot will be rejected if three or more assemblies throw
band fragments having length not greater than 0.500 inch.
(3) The lot will be rejected if any assembly throws a band fragment
having length greater than 0.500 inch (indicative of deep-seated band
lamination).
10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals