3.9.1 Processing defects. -The projectile metal parts shall be free of
dents, deep scratches, cuts, sharp edges, burrs, metals flaws, excessive
surface roughness and other forms of substandard workmanship.
3.9.2 Cleanliness. -The projectile metal parts shall be free of all foreign
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. -Unless otherwise specified in the
contract or Purchase order, the supplier is responsible for the perform-
ante of all inspection requirements as specified herein. Except as other-
wise specified in the contract or order, the supplier may use his own or
any other facilities suitable for the performance of the inspection require-
ments specified herein unless disapproved by the Government. The Government
reserves the right to perform any of the inspections set forth in the speci-
fication where such inspections are deemed necessary to assure supplies and
services conform to prescribed requirements.
4.1.1 Quality assurance terms and definitions .-Reference shall be made to
MIL-STD-109 for definition of quality assurance terms.
First article sample.
4.2.1 Initial production sample. -At the beginning of regular production a
sample shall be submitted in accordance with contract requirements and shall
Rotating band blanks
Body-adapter and rotating band assemblies (uncoated)
Body-adapter and rotating band assemblies (painted)
4,000 Body-adapter and rotating band assemblies (painted)
4,000 Closure discs
The sample shall be manufactured using the same materials, equipment,
processes and procedures as will be used in regular production. Identi-
fication shall be in accordance with MIL-STD-1168.