10/ If two or more units of the sample fail to comply with the corrosion
resistance requirement, the lot shall be rejected. If one unit fails to
comply with the requirement, a second sample consisting of the same number
of units as specified for the first sample shall be tested. If in the
accumulated samples, two or more units fail to comply with the corrosion
resistance requirement, the lot shall be rejected.
11/ The occurrence of one or more of the following casualties, as witnessed
by hole(s) in the fragmentation screen(s), or recovery of the part(s) or
fragment(s) shall be cause for rejection of the lot, except as otherwise
Body-adapter separation or breakup.
Loss of nose,
c. Complete rotating band separation. This is defined as detachment
of all of the band having band seat knurling imprint.
d. Partial rotating band separation. This is defined as detachment
of part of the band having band seat knurling imprint.
e. The following criteria shall apply to thrown band fragments having
no evidence of band seat knurling imprint:
(1) The lot will be rejected if three or more assemblies throw
band fragments having length not greater than 0.500 inch.
(2) The lot will be rejected if any assembly throws a band frag-
ment having length greater than 0.500 inch (indicative of deep-seated band
(3) The lot will not be penalized for band particles thrown as a
result of normal band fringing or slivering.
4.3.5 Packaging, packing and marking inspection. -Inspection for packaging,
packing and marking shall comply with applicable requirements of MIL-STD-1169.
4.3.6 Inspection equipment. -Index of Inspection Equipment List (IEL) 7258805
identifies the applicable inspection equipment lists indicating the equipment
required to perform examination and tests prescribed herein. Equipment design
shall be in accordance with code designation on the applicable IEL (reference
is made to Inspection Equipment List for definition of coding, Dwg. Bl107228,
a detail of IEL 7258805).