 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-70995 (AR)
4.3.3 Rejection. If any assembly, component, or test specimen
fails to comply with any of the applicable requirements, the first ar-
title sample shall be rejected. The Government reserves the right to
terminate inspection upon any failure of any assembly, component or
test specimen to comply with any of the requirements.
4.4
Quality conformance inspection.
4.4.1 Inspection lot formation. The term "inspection lot" is
defined as a homogeneous collection of units of product from which a
representative sample is drawn or which is inspected 100 percent to
determine conformance with applicable requirements. Unit of product
selected for inspection shall represent only the inspection lot from
which they are drawn and shall not be construed to represent any prior
or subsequent quantities presented for inspection. Homogeneity shall
be considered to exist provided the inspection lot has been produced
by one manufacturer, in one unchanged process, using the same
materials and methods, in accordance with the same drawings, same
drawing revisions, and same specifications and same specification
revisions. All material submitted for inspection in accordance with
this specification shall comply with the homogeneity criteria
specified herein, regardless of the type of inspection procedure which
is being applied to determine conformance with requirements.
4.4.2 Examinations and tests.
4.4.2.1. Classification of Characteristics. Quality conformance
examinations and tests are specified in the following Classification
of Characteristics paragraphs. The contractor's quality program or
detailed inspection plan shall provide assurance of compliance of all
characteristics with the applicable drawing and specification require-
ments utilizing, as a minimum, the conformance criteria specified.
Where specified herein, attributes sampling inspection shall be con-
ducted in accordance with Table II, using the inspection levels
stated in the classification of Characteristics paragraphs.
8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals