 |
|||
|
Page Title:
Table I - Classification of Defects |
|
||
| ||||||||||
|
|  MIL-P-48602(MU)
4.3.2.2 Plotting board, with case.- Examination and tests related to
S e c t i o n 3 herein shall be performed on a class basis in accordance with
M I L - S T D - 1 0 5 and the sampling plans specified in Tables I, II and III herein.
E x a m i n a t i o n and tests for packaging, packing and marking shall be in accord-
ance with MIL-P-14232 and Section 5 herein. The tabulated classification
of defects in Tables I, II and III shall constitute the minimum inspection
to be performed by the supplier after first article approval and prior to
G o v e r n m e n t acceptance or rejection by item or lot.
TABLE I - CLASSIFICATION OF DEFECTS
CLASS
CRITICAL: NONE
REQUIREMENT
MAJOR:
AQL 1..0% DEFECTIVE
TEST PROCEDURE
101.
Accuracy
3.4
4.6.3
3.5.1
102.
Warpage between disk and base
4,6.4
103.
Warpage, deflection arm
3.5.2
4.6.5
3.6
104.
Surface finish, disk and base grid
4.6.6
3.7
105.
Operability
4.6.7
106.
Plotting board case
3.8
4.6.8
MINOR: NONE
N O T E : The tests in Table I shall be conducted at a temperature between
6 0 and 90F.
4.3.3 Acceptance and rejection.- Rejected lots shall be screened for
all defective characteristics. Removal or correction of defective units
and resubmittance of rejected lots shall be in accordance with "Acceptance
a n d Rejection" as specified in MIL-STD-105.
4.4 Special sampling.
4.4.1 General.- One plotting board, with case, shall be selected at
r a n d o m as a special sample from each 100 produced or from each month's
production, whichever occurs first. The sample shall meet the requirements
and tests in Table II.
TABLE II
NO.
CHARACTERISTIC
REQUIREMENT
TEST PROCEDURE
301.
Fabrication
3.1
A p p l i c a b l e draw-
ing - visual
3.2
302. General specification
MIL-F-13926 -
visual
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals