 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-48606B(AR)
4.4
Quality conformance inspection.
4.4.1 Inspection lot formation. The term "inspection lot" is
defined as a homogeneous collection of units of product from which a
representative sample is drawn or which is inspected 100 percent to
determine conformance with applicable requirements. Units of
product selected for inspection shall represent only the inspection
lot from which they are drawn and shall not be construed to
represent any prior or subsequent quantities presented for
inspection. Homogeneity shall be considered to exist provided the
inspection lot has been produced by one manufacturer, in one
unchanged process, using the same materials and methods, in
accordance with the same drawings, same drawing revisions, same
specifications and same specification revisions. All material
submitted for inspection in accordance with this specification shall
comply with the homogeneity criteria specified herein, regardless of
the type of inspection procedure which is being applied to determine
conformance with requirements.
4.4.2 Examinations and tests.
4.4.2.1 Components, assemblies and subassemblies. All
components, assemblies and subassemblies shall be inspected in
accordance with the inspection provisions contained in this
specification and the Quality Assurance Provisions (QAP) listed in
the Technical Data Package (TDP). In the absence of QAPs, the
applicable quality assurance provisions of MIL-F-13926 shall apply.
4.4.2.2 Final acceptance Inspection. subsequent to first
article approval, examinations and tests related to Section 3 herein
shall be performed in accordance with the sampling plans specified
in 4.4.2.3 herein. Examination and test for packaging and marking
shall be in accordance with Section 5 herein. The tabulated
classification of defects in 4.4.2.3 shall constitute the minimum
inspection to be performed by the contractor after first article
approval and prior to Government acceptance or rejection by item or
lot l
4.4.2.3 Functional tests.
The tests in Table III shall be
performed on a 100% basis.
8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals