 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-48609(AR)
TABLE I
CONNECTIONS
CHARACTERISTICS
CONDITION
ITEM
CONNECTED
LOADS
1.
BETWEEN THE
FOLLOWING
TERMINALS:
J1-A and J1-D
28 Kilohms 1%
RESISTOR
1.1
J1-C (+) and
+15 1.2 Vdc
POWER SOURCE
2.
J1-D (-)
3.3.1.1 Output voltage and ripple. - The output voltage
between J1-A(+) and J1-D(-) shall be 214 36 VDC, and the
maximum ripple voltage shall be 15 volts peak-to-peak when the
power source of Table I, Item 2 is applied with the indicated
polarity over the range specified therein.
3.3.1.2 Input current. - The maximum currect supplied to
terminal J1-C shall be 260 milli-amperes when the load and
power are applied as specified.
3.3.2 Environmental.
3.3.2.1 Storage temperature. - The power supply unit shall
meet the requirements of 3.3.1 at ambient temperature (+60F
to +90F) after exposure and thermal stabilizatlon at -80F
and +160F.
3.3.2.2 Operating temperatures. - The power supply unit
shall meet the requirements of 3.3.1 while thermally stabilized
at -40F and +125F, subsequent to which it shall meet the
above requirements at ambient temperature (+60F to +90F).
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals