 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-50603B(AR)
3.8 Workmanship. All parts and assemblies shall be
fabricated, loaded and assembled in a thorough and workmanlike
manner and shall be free of oil, grease and other foreign
material. In addition, the primer shall comply with the standards
specified in ORD-SIP-S314.
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise
specified in the contract or purchase order, the supplier is
responsible for the performance of all inspection requirements
specified herein. Except as otherwise specified, the supplier may
utilize his own facilities or any commercial laboratory acceptable
to the Government. The Government reserves the right to perform
any of the inspections set forth in the specification where such
inspections are deemed necessary to assure supplies and services
conform to prescribed requirements. In addition, unless specified
herein or in the contract the provisions of MIL-A-48078 shall
apply and are hereby made a part of this detail specification.
4.1.1 Res ponsibility for compliance. All items must meet all
requirements of sections 3 and 5. The inspection set forth in
this specification shall become a part of the contractor's overall
inspection system or quality program. The absence of any
inspection requirements in the specification shall not relieve the
contractor of the responsibility of assuring that all products or
supplies submitted to the Government for acceptance comply with
all requirements of the contract. Sampling in quality conformance
does not authorize submission of known defective material, either
indicated or actual, nor does it commit the Government to
acceptance of defective material.
4.2 Classification of inspection. The inspection
requirements specified herein are classified as follows:
a. . First article inspection
Quality conformance inspection
b.
4.3 First article inspection.
4.3.1 Submission. The contractor shall submit a first
article sample as designated by the Contracting Officer for
evaluation in accordance with the provisions of 4.3.2. The first
article sample shall consist of the following items in sample
quantities as indicated.
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals