 |
|||
|
Page Title:
Table III. Classification of Inspections |
|
||
| ||||||||||
|
|  MIL-PRF-62365C(AT)
TABLE III. Classification of inspections - Continued.
Conformance
First
Test
Title
Requirement
Inspection
article 100%
Direction of rotation 1/
3.3.10
4.2.6
X
Configuration
3.3.11
4.5.1
X
Weight
3.3.12
4.5.1
X
Starting torque
3.4.1
4.5.3.1
X
X
Running torque
3.4.2
4.5.3.2
X
Friction torque
3.4.3
4.5.3.3
X
X
Holding torque
3.4.4
4.5.3.4
X
X
Intermittent torque
3.4.5
4.5.3.5
X
Attitude
3.4.6
4.5.3.6
X
Resisting load
3.4.7
4.5.3.7
X
X
Cylinder block lift
3.4.8
4.5.3.8
X
X
Volumetric efficiency
3.4.9
4.5.3.9
X
Intermittent speed endurance
3.4.10
4.5.3.10
X
Running leakage
3.4.11.1
4.5.3.11.1
X
Shaft seal leakage
3.4.11.2
4.5.3.11.2
X
X
Idling loss
3.4.12
4.5.3.12
X
X
Consumption
3.4.13
4.5.3.13
X
X
Direction of rotation
3.4.14
4.2.6
X
Break-in run
3.4.15
4.2.1
X
X
High temperature (operating)
3.5.1
4.5.4.1
X
X
4.5.4.1.1
3.5.1.1
High temperature (nonoperating)
4.5.4.2
X
3.5.2
Low temperature (operating)
4.5.4.3
X
3.5.3
Salt fog
X
4.5.4.4
Fungus
3.5.4
Shock (nonoperating)
3.5.5
4.5.4.5
X
Vibration (nonoperating)
3.5.6
4.5.4.6
X
Proof pressure
3.5.7
4.5.4.7
X
Burst pressure
3.5.8
4.5.4.8
X
Marking 1/
3.6
4.5.2
X
Workmanship 1/
3.7
4.5.2
X
1/ See 4.5.1 and table IV.
4.5 Method of inspection.
4.5.1 Defects. Conformance to 3.3.8, 3.3.11 and 3.6 shall be determined by examination
for the defects listed in table IV. Examination shall be visual, tactile, or by measurement by SIE.
11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals