 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-70624A(AR)
3.3.4 Cold temperature (Minus 25F - 5F). After
conditioning as specified in 4.5.1.4, the Power Box Assembly shall
meet the requirements specified in 3.3.1 and 3.3.2.
3.3.5 Hot temperature (120F + 5F). After conditioning as
specified in 4.5.1.5, the Power Box Assembly shall meet the
requirements specified in 3.3.1 and 3.3.2.
3.3.6 Transportation vibration. After being subjected to
vibration specified in 4.5.1.6, the Power Box Assembly shall meet
--
the requirements specified in 3.3.1 and 3.3.2.
3.4 Circuit board 1 assembly (Dwg. 9360006) prior to assembly
into electronics box. The printed circuit board when tested as
specified in 4. 5.2 shall meet the following requirements:
3.4.1 The power outputs shall be as follows when tested as
specified in 4.5.2.4:
Volts
Pin
0 + .1
A, L
B (Info Only)
5.30 to 5.45 (Info Only)
E
Less Than 1
8.2 1
J
11 1
K
131
U
V
6 .l
21
X
11 1
Y
3.4.2 The power outputs shall be as follows when tested
specified in 4.5.2.5:
Pin
Volts
0 + .1
A, L
5.30 to 5.45 (Info Only)
B (Info only)
E
Less Than 1
8.21
J
44 1
K
141
U
23.5 1
V
5.95 .1
X
441
Y
3.5 Circuit board 2 assembly Dwg. 9360013 prior lto assembly
into electronics box. The printed circuit board when tested as
specified in 4.5.3 shall meet the following requirements:
3.5.1 Power outputs. The power outputs shall be
follows
when tested as specified in 4.5.3.1:
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals