|
| MIL-P-82534(OS)
3.
REQUIREMENTS
3.1 General requirements. Unless otherwise specified in the contract or
order, all materials and treatments of materials and parts used in the manu-
facture of the programmer shall be in accordance with the requirements specified
herein and with the applicable documents listed in BuWeps LD 541536.
3.2 Preproduction samples. Unless otherwise specified in the contract
or order, preproduction samples of the programmer shall be manufactured using
the methods and procedures proposed for production. The sample shall be tested
as specified in Section 4 herein and is for the purpose of determining that, prior
to starting production, the contractor's production methods are capable of
yielding items that comply with the technical requirements of the contract.
3.3 Performance and product characteristics. The programmer shall
meet the following performance and product characteristics.
3.3.1 Circuit resistance. The programmer circuits, listed in Table I,
shall have the resistances indicated.
Table I. Programmer Circuit Resistance Requirements
* Programmer cover side down
** The resistance between S and f (S negative) shall be 25 to 5000 ohms after
performing the acceleration tests in 4.5.1.7.
3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |