 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-82691A (OS)
TABLE II. Ballistic
properties.
3.7 Workmanship. The material shall be uniform in quality and
shall be free of voids, cracks, fissures or other defects that
could adversely affect its use.
QUALITY
ASSURANCE
PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in
the contract or purchase order, the contractor is responsible for
the performance of all inspection requirements (examinations and
tests) as specified herein. Except as otherwise specified in the
contract or puchase order , the contractor may use his own or any
other
inspection
facilities suitable for the performance of the
requiremetns
specified
herein,
unless disapproved by the Gover-
nment. The Government reserves the right to perform any of the
inspections set forth in this specification where such inspections
are
conform to
deemed necessary to ensure supplies and services
prescribed requirements (see 6.2).
meet
all
4.1.1
Responsibility for compliance.
All items shall
requirements
of sections 3 and 5.
The inspection set forth in
contractor`s
this
the
specification
shall
become a part of
The absence of any
overall 1 inspection system or quality program.
inspection requirements in the specification shall not re leve the
contractor of the responsibility of ensuring that all products or
submitted to the Government for acceptance comply With
supplies
all requirements of the contract . Sampling inspection, as part of
operations, is an acceptable practice to ascertain
manufacturing
authorize
however, this does not
conformance to
requirements,
submission of known defective material, either indicated or actual,
does it commit the Government to accept defective material.
nor
4.2 Classification of inspections. The inspection
requirements
specified herein are classified as follows:
a. First article inspection (see 4.4).
b. Quality conformance inspection (see 4.5).
(see 6.2).
4.3
Inspection conditions. Unless
otherwise specified
under the following
conditions:
all
inspection shall be performed
a. Temperature 18 to 35 deg. C (65 to 95 deg. F)
b. Altitude: Sea level
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals