 |
|||
|
Page Title:
Table I. Classification of Defects |
|
||
| ||||||||||
|
|  MIL-Q-45618F(MU)
TABLE I - CLASSIFICATION OF DEFECTS
TEST PROCEDURE
REQUIREMENT
CLASS
CRITICAL: NONE
MAJOR : AQL 0.65% Defective
3.4.3
4.6.3
101
Vibration
q
4.6.4
3.5
102
Alignment
q
4.6.5
3.6.1
103.
Accuracy
4.6.6
3.6.2
104.
Backlash
4.6.7
3.6.3
105.
Level vial
4.6.8
3.6.4
106.
Torque
NONE
MINOR :
4.3.3 Acceptance and rejection.- Rejected lots shall be screened
for all defective characteristics. Removal or correction of defective
units and resubmittance of rejected lots shall be in accordance with
"Acceptance and Rejection" as specified in MIL-STD-105.
4.4 Special sampling.- One quadrant shall be selected at random from
each 100 produced or from each month's production, whichever occurs first.
The sample shall meet the requirements and tests in Table II.
TABLE 11
TEST PROCEDURE
REQUIREMENT
CHARACTERISTIC
301.
3.1
Drawings and specifications
Materials
3.2
Visual and drawings
302.
Fabrication
Visual and MIL-F-13926
3.3
303.
General specifications
4.4.1 Environmental.- Three quadrants shall be selected at random
as a special sample from each 50 produced or from each month's production
whichever occurs first. The samples shall meet the requirements and
tests in Table III and shall then meet the requirements and tests in
Table I.
TABLE III
TEST PROCEDURE
REQUIREMENT
CHARACTERISTIC
4.6.2
3.4.1
304.
Operating temperatures
4.6.1
3.4.2
305
Storage temperatures
q
4.4.2 Failure of sample.- Should any one item of a special sampling
fail to meet the specified test requirements, acceptance of the represented
inspection lot will be suspended by the Government until necessary correc-
tions have been made by the contractor and the resubmitted samples have
been approved.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals