(Copies of specifications, standards, drawings and packaging data sheets
required by suppliers in connection with specific procurement functions
should be obtained from the procuring activity or as directed by the
2.2 Other publications.- The following document forms a part of this
specification to the extent specified herein. Unless otherwise indicated,
the issue in effect on date of invitation for bids or request for proposal
DEFENSE SUPPLY AGENCY MANUAL
Radioactive Commodities in the DOD
(Copies of DSAM 4145.8 may be obtained from the Superintendent of Documents,
U.S. Government Printing Office, Washington, D.C. 20402)
3.1 Regulations Pertaining to radioactive devices.- Marking, identifi-
cation, handling, and shipping of radioactive devices shall be in accordance
with DSAM 4145.8.
3.2 Fabrication.- The quadrant shall be manufactured in accordance
with Drawing F11730915.
3.3 General specification.- The following requirements of
MIL-F-13926 shall be met:
Order of precedence
Dimensions and tolerances
Inorganic protective surface finishes
Part identification and marking
3.4.1 Storage temperatues.- The quadrant shall show no evidence
of physical failure due to being thermally stabilized at -80 and +160
3.4.2 Operating temperatures.- The quadrant shall meet the applicable
requirements of 3.10 while thermally stabilized at -40 and +150F.
3.4.3 Vibration.- The telescope shall be vibrated in a vertical
plane at a constant frequency of thirty cycles per second with an amplitude
of 1/16 inch (1/8 inch total excursion) for a period of five minutes plus
or minus fifteen seconds. Subsequent to vibration there shall be no
evidence of physical failure.
Privacy Statement - Press Release - Copyright Information. - Contact Us