188.8.131.52 Packaging, packing, and marking. Packaging, packing, and
marking shall comply with the requirements of Section 5.
PREPARATION FOR DELIVERY
5.1 Preservation and packaging . The levels of preservation and pack-
aging shall be as specified (see 6.2).
5.1.1 Level A
184.108.40.206 Unit packaging. The firing relay panel shall be packaged in
accordance with Method IIB of MIL-P-116.
5.1.2 Level B.
5.1.3 Level C
220.127.116.11 Unit packaging. The firing relay panel shall be packaged in
accordance with Method III of MIL-P-116.
Packing shall be Level A or Level C as specified (see 6.2).
5.2.1 Level A
18.104.22.168 Consolidation container. The firing relay panel, packaged as
described in 22.214.171.124, shall be packed in a wooden box in accordance with
PPP-B-621, Class 2.
126.96.36.199 Palletizing. When specified, Level A packs shall be palletized
in accordance with MIL-STD-147, Pattern No. 101 (MS 53102). (See 6.2.)
5.2.2 Level C. The firing relay panel, packaged in accordance with
188.8.131.52, shall be packed to afford protection against damage during ship-
ment from the supply source to the first receiving activity for immediate
use. Containers shall comply with common carrier regulations applicable
to the mode of transportation.
5.3 Levels A or C cushioning. The unit package shall incorporate suf-
ficient cushioning material, bracing, or other adequate shock absorbing
devices to ensure the firing relay panel will meet all the requirements
of Section 3 after being tested in accordance with paragraph 184.108.40.206
(Vibration), and 4.4.2 (Shock). At the time of packaging or packing, the
moisture content of the cushioning material shall be no more than 5 percent.
None, unless otherwise specified.