6 August 2001
21 November 1968
RESISTORS, FIXED, FILM, INSULATED, STYLE RL07
This specification is inactive for design after
21 November 1968. Use MIL-PRF-39017/1.
This specification is approved for use by all Depart-
ments and Agencies of the Department of Defense.
1.1 Scope. This specification covers the associated requirements for insulated, film, fixed resistors of
2-percent and 5-percent resistance tolerance. These resistors are capable of full-load operation at an
ambient temperature of 70C and have a resistance-temperature characteristic of +200 parts per million
per degree Celsius (ppm/C).
1.2 Part or Identifying Number (PIN). Resistors covered by this specification are identified by a PIN
which consists of the basic number of this specification and a coded dash number taken from table I. The
PIN is in the following form:
Performance specification number
Coded dash number
The coded dash number is derived in accordance with MIL-PRF-22684.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of
this list, document users are cautioned that they must meet all specified requirements documents cited in
sections 3 and 4 of this specification, whether or not they are listed.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may
be of use in improving this document should be addressed to: DSCC-VAT, P.O. Box 3990 ,
Columbus, OH 43216-5000, by using the Standardization Document Improvement Proposal (DD
Form 1426) appearing at the end of the basic document or by letter.
1 of 6
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.