|
| MIL-R-23016(Wep)
3.2.10
Antijamming:
The electronic system or equipment shall be designed to
obtain the maximum inherent protection against possible
interfering signals caused by enemy jamming, inadvertent
radio interference, and atmospherics.
3.2.11
Reliability and longevity:
The reliability and longevity requirements shall be as
specified in paragraph 3.3.
3.2.12
Maintenance provisions:
Operational checkout provisions:
3.2.12.1
The equipment shall be designed to provide for connections
for such test equipment as may be required for operational
checkout tests. The equipment shall be designed in such
manner as to permit use of items of standard service test
equipment where possible. If special test equipment is
required, the procuring activity shall be supplied with
recommendations therefor.
3.2.12.2
Chassis test points:
Circuit test facilities shall be provided on the chassis of
the equipment. These test facilities shall consist of suit-
able test-point terminals mounted on the chassis and electric-
ally connected to selected positions of the circuit. The
location of the test points shall be determined by the com-
ponent layout and circuit involved. Sufficient test points
shall be made accessible to facilitate the location of most
probably circuit malfunctions which may reasonably be expected
to occur within the equipment.
Microphonics:
3.2.13
Microphonics effects shall be kept to an absolute minimum or
below the point where they are detrimental.
3.2.14
Moisture Pockets:
Pockets, wells, traps, and the like, in which water and con-
densed moisture can collect shall be eliminated or properly
drained.
92
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |