 |
|||
|
|
|||
| ||||||||||
|
|  MIL-R-23016(Wep)
3.3.3.11.2
Fidelity:
The overall frequency response of the transmitter from its audio
frequency input to its radio frequency output shall not be more
than 5 db variation from 300 to 3,000 cps. The total harmonic
distortion at 85% modulation shall not exceed 20 percent.
The noise modulation on the AME carrier shall be at least 40 db
below PEP power.
3.3.3.12
SSB/FSK Modulation:
3.3.3.12.1
Capability:
When a single tone of 0.25 v rms at 1000 cps is applied to the
audio input terminals, the equipment shall produce rated carrier
power output.With two equal (0.1 volts rems each) tones applied in SSB, the equipment shall
produce rated PEP in accordance with 3.3.3.7 when manually over-
riding the transmitter gain control.
3.3.3.12.2
Fidelity:
The variation in overall response of the equipment shall be less
than 5 db from 300 to 3,000 cps. The total harmonic content of
the transmitter audio shall not exceed 20 percent.
3.3.3.12.3
Automatic Level Control:
An automatic level control shall be provided to maintain rated
peak power as specified in paragraph 3.3.3.7 and to maintain
the linearity and spurious output requirements of paragraph
3.3.3.9.
Microphone Input:
3.3.3.13
The equipment shall supply 25 ma for a 82 ohm carbon microphone
input.
CW Keying:
3.3.3.14
The equipment shall be capable of a break-in type of operation
up to 20 words per minute while utilizing an antenna which is
common to the receiver. The transfer time from receiver
condition to transmitter condition shall be less than 150 milli-
seconds. Once in the transmitter condition, the equipment shall
110
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals