 |
|||
|
|
|||
| ||||||||||
|
|  MIL-R-23016(Wep)
3.3.4.2.1
Function:
This unit shall provide prime control of the Radio Set and its
associated antenna coupler, and shall include all controls for
remote operation and frequency selection. Selection and direct
frequency readout of any one of the 28,000 available operating
frequencies of the receiver-transmitter shall be provided in
increments of one KC.
3.3.4.2.2
Form Factor:
The Radio Control Set shall have the outline dimensions which
are shown in figure 4.
3.3.4.2.3
Contents of the Unit:
This unit shall contain all circuits necessary to perform
frequency selection, emission selection, RF sensitivity control
and primary input power control.
3.3.4.2.4
Weight:
The weight of the radio control unit shall not exceed 2.0 pounds.
3.3.4.2.5
Connections:
All connections to this unit shall be made through one plug
mounted on the rear of the unit and extending through the dust
cover.
3.3.4.2.6
Controls, Internal:
There shall be no internal, adjustable controls.
3.3.4.2.7
Controls, Panel Mounted:
The following controls shall be provided in the panel of the
console control box:
(a) A "Service Selector Switch" shall be located on the lower
left side of the control panel to provide for control of
the primary power input and the selection of the mode of
operation, e.g. AM, USB, LSB, CW and DATA.
114
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals