 |
|||
|
|
|||
| ||||||||||
|
|  MIL-R-23016(Wep)
4.2.1.1
The contractor shall submit all data collected in conducting
these tests to the procuring agency for review and approval.
This data shall include a list of all electrical and electronic
parts giving their specified voltage, current and temperature
rating and the applied circuit voltage, current and ambient
and surface temperatures. The ambient and surface temperature
shall be obtained under the extreme high temperature operating
condition. Such data on parts may be included as part of the
preliminary parts list.
4.2.2
Service Approval Tests:
At the completion of the contractor's demonstration tests and
when requested by the procuring activity, the equipment shall
be delivered to a specified government laboratory for additional
testing. This additional testing may consist of duplicating
tests previously conducted and such other tests as are deemed
necessary to determine compliance with all applicable design
and performance requirements.
4.2.2.1
Accessory Material:
In addition to the complete equipment submitted for service
approval tests, the contractor shall also submit the following
accessory material and design data:
(a) Complete set of interconnecting cables.
(b) One set of spare parts peculiar to the equipment. (Stan-
dard parts such as resistors, capacitors, and tubes in
common use are not required.)
4.2.2.1.1
Design Data:
The following design data shall be supplied:
(a) Three copies of a cabling diagram of the complete equipment.
(b) Three copies of outline dimensional sketches of all major
and minor assemblies of any detail parts not internal
therein showing projections.
120
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals