 |
|||
|
Page Title:
Sampling for quality conformance inspection |
|
||
| ||||||||||
|
|  MIL-R-24414D(SH)
TABLE VI.
cl assification of defects .
(Continued)
Defects
Categories
Minor:
Mounting dimensions (bolt hole diameter or spacing) not
201
as specified.
Diameter of reel exceeds the maximum permissible.
202
Overall height exceeds the maximum permissible.
203
Overall width exceeds the maximum permissible.
204
205
Horizontal or vertical location inlet flange not within
the specified tolerance.
Weight of reel exceeds the maximum allowable.
206
207
Marking, manufacturer's name or trademark missing,
illegible, incorrect or not as specified.
Means of lubrication not easily accessible.
208
Painted wrong color.
209
Sampling for quality conformance inspe ction. Reel samples shall be
4.5.3
selected at random from each lot in accordance with inspection level II of
MIL-STD-105.
Sampling for qualitv conform ante inspection
TABLE VII.
Sample Size
Minor
Major
Characteristic
Characteristic
Lot Size
5
All
2
to
8
8
5
9
to
50
8
7
51
to
90
12
11
91
to
150
19
13
151
to
280
21
16
281
to
500
19
501
to
1200
27
4.6 Exami nation.
Sample reels selected as specified in 4.5.2 shall be
examined to determine conformance to the requirements of this specification not
involving tests.
Examination shall be conducted as specified in Table VII.
12
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals