 |
|||
|
Page Title:
Table IV. Minimum and maximum nominal resistance values |
|
||
| ||||||||||
|
|  MIL-R-26/6C
3.4 Resistance. The minimum and maximum nominal resistance values shall be as specified in table IV.
3.4.1 Standard resistance values. For standard resistance values see RS-385.
TABLE IV. Minimum and maximum nominal resistance values.
Resistor
Resistance value (ohms)
Style
Minimum
Maximum
RW80
0.10
3,160
RW81
0.10
1,000
RW80
RW81
A
.406 .031
.250 .031
B
.094 .031
.085 .020
D
.020 .0015
.020 .0015
Inch
mm
Inch
mm
.0015
.040 .250
6.35
.020
.51
.375
9.53
.031
.79
.406
10.31
.085
2.16 1.750
44.45
.094
2.39
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. These styles shall be untapped.
4. The end of the resistor body is the point where the diameter reduces to 0.06 inch.
FIGURE 1. Styles RW80 and RW81.
3.5 Thermal shock. The resistors shall not change in resistance in excess of (0.2 percent +0.05 ohm).
3.6 Short-time overload. The resistors shall not change in resistance in excess of (0.2 percent +0.05
ohm).
3.7 High-temperature exposure. The resistors shall not change in resistance in excess of (0.5 percent
+0.05 ohm).
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals