|
| INCH-POUND
MIL-R-27208/4J
11 October 2006
SUPERSEDING
MIL-R-27208/4H
13 June 2001
MILITARY SPECIFICATION SHEET
RESISTORS, VARIABLE, WIRE WOUND,
(ADJUSTMENT TYPE, LEAD SCREW ACTUATED),
STYLE RT22
THIS SPECIFICATION INACTIVE FOR NEW DESIGN AFTER
5 OCTOBER 1973, (SEE 6.4). USE MIL-PRF-39015/2.
This specification is approved for use by all Departments
and agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for style RT22 adjustment type, lead screw actuated, wire
wound, variable resistors.
1.2 Part or Identifying Number (PIN). Resistors covered by this specification are identified by a PIN which consists
*
of a basis style and a coded number. The PIN is in the following form:
RT22
C2P102
⏐
⏐
⏐
⏐
Style
Coded number
(see MIL-PRF-27208)
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
*
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to: Defense Supply Center, Columbus,
ATTN: DSCC-VAT, Post Office Box 3990, Columbus Ohio 43218-3990, or emailed to resistor@dla.mil. Since contact
information can change, you may want to verify the currency of this address information using the ASSIST Online
database at http://assist.daps.dla.mil.
AMSC N/A
FSC 5905
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |