 |
|||
|
Page Title:
Performance and Product Characteristic Requirements |
|
||
| ||||||||||
|
|  MIL-R-48233A(MI)
3.6 Heating. Coated stabilizing rods shall be heated in an
induction bonding or dielectric heater to obtain maximum bond
strength between-the metal rod and coating. There shall be no
delay-between coating the rod and heating-the rod in the
induction bonding or dielectric heater.
3.7 Performance and Product Characteristic Requirements. The
stabilizing rod shall meet the following performance and product
characteristics requirements .
3.7.1 Composition. The coating material for extruded coatings
shall conform to the chemical and physical requirements shown
in Tables I and II.
TABLE I - Composition of Coating Material
Material
Percent by Weight
Requirements
Potassium Sulfate
65 to 72
MIL-P-193; also 90%
(min.) passing No.
100 U.S. Std. Sieve
Ethyl Cellulose
30
Shall meet the re-
quirements of Table II
I
TABLE II - Composition of Ethyl Cellulose Compound
Percent by Weight
Material
Requirements
Ethyl Cellulose
70 + 2
10 + 2
Plasticizer
Normal Butyl
20
MIL-B-21465
Stearate
Color or Color
Masking Material
0.O1 (max.)
Red Oil, Dye or
Approved Equivalent
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals